• Six different lengths can be programmed to cut
  • Possible to cut two roll tapes at the same time due to Dual Photo Sensor
  • Preset and loop Counter
  • Tape Support to position a cut piece of tape for easy to take
  • Set a tape without using bobbin
  • Possible to cut non-adhesive tapes
  • Build-in Separator for cutting two rolls tape, Guide Plate, and Blade Oil

    Cut a tape with backing paper
    while removing it
    ※Only supply with ZCUT-9GR
    Arm Stand

    ※Only supply with ZCUT-9GR

    Cut Length
    5 - 999 mm
    Tape Width
    6 - 60 mm
    Max. Outside Dia. of Roll
    300 ㎜
    Tape Thickness
    0.05 mm - 0.3 mm
    Usable Tapes
    Craft, PP, Vinyl, Filament, Glass Cloth, Double-Sided, Strapping, Protective Film, Aluminum Foil, and Others
    Feeding Speed
    220 mm sec ・Approximately 50pcs/min.(in the case of cutting 100mm with craft tape)
    Separator. Blade Oil. Guide Plate. Power Cord.
    Rated Voltage
    AC100V 50/60Hz 25W Fuse2A(AC inlet Build-in)
    116 mm(W)x140 mm(H)x213 mm(D)

    *Some of usable tapes may not cut depends on material/tape manufacturer.
    *The length of tape might be have an error depends on types of tape.
    *Specification are subject to change without prior notice.

    >>Download Catalogs